Hydra DERAMA ABRASION machine

How to use

As Featured On

BENEFITS

Save space and money with this multifunctional 7 in 1 skincare machine. It improves blood circulation, promotes collagen production, removes dead skin, blackheads and wrinkles. Shrinks pores, fades dark circles around eyes , eliminates redness and eye bags. Whitening, firming, lifting and skin tightening.

Why should you choose it?

7 treatments in 1 machine

Three 400 ml aqua peel solutions 

Easy to set and use

Ideal for beauty salons, spas, suites and personal use.

State-of-the art technology


[How to SET UP 1] Tutorial

In this video, we’re going to show you how to install and use the bottles and liquid solutions and we’ll give possible solutions to common queries related to the treatment.

To continue reading please click here...

Bruun´s Hydra Oxygen Machine Abrasion Pen works with three front bottles and two more bottles on the back to perform one of nowadays most popular and beneficial facial treatments


On the front of the machine, you’ll find bottles A, B and C which are filled with the three liquid solutions that come with the machine. These are AS1, AS2 and AO3


Check out how to use them

1- First remove the bottles by pressing the button above them and pulling them downwards.

2- We recommend always using the same bottle for one liquid solution

Bottle A with AS1 Solution (BLUE)

Bottle B with AS2 Solution (YELLOW/ORANGE)

Bottle C with AO3 Solution (PINK)


Find the liquid solutions following this link! 

3- BOTTLE A

A- Bottle A will contain AS1 Solution

B- Unscrew and remove the lid from the bottle. Fill at least half of the bottle with the solution and put the lid back on and adjust it. Place the bottle back in its position and make sure you hear a “click” sound.

C-Turn the center knob and set it on “A” to start operating with that bottle.


3- BOTTLE B

A- Bottle B will contain AS2 Solution

B- Unscrew and remove the lid from the bottle. Fill at least half of the bottle with the solution and put the lid back on and adjust it. Place the bottle back in its position and make sure you hear a “click” sound.

C-Turn the center knob and set it on “B” to start operating with that bottle.


5- BOTTLE C


A- Bottle C will contain AO3 Solution

B- Unscrew and remove the lid from the bottle. Fill at least half of the bottle with the solution and put the lid back on and adjust it. Place the bottle back in its position and make sure you hear a “click” sound.

C-Turn the center knob and set it on “C” to start operating with that bottle.


—------------------------------------------------------

You’ve just seen how to set and use the front bottles. Now let’s talk about the back bottles.

—------------------------------------------------------

On the back of the machine there are two bottles.

1- “WASTE LIQUID” - it is filled with water when using the abrasion pen

2- “H2O2” - it can be filled with distilled water. 

—----------------------------------------------------------------

4- H2O2 BOTTLE


a) Unscrew and remove the bottle

b) FIll at least half of the bottle with distilled water 

c) Place the bottle back in its position and fasten it.

The bottles must be firmly fastened so that the machine creates the necessary pressure and water and air suction. 

d) You can purify the water in the H2O2 bottle with the purifying Blue Light. Just press the option “H202” on the screen and it will start working. You can also let it on while you do the treatment.


e) In order to use this bottle, turn the central knob and set it on “D”


—-----------

5- “WASTE LIQUID” BOTTLE


When using the Abrasion Pen, the used water goes into the “waste liquid” bottle. 

c) When the waste liquid bottle is full, the machine will inform you by displaying a red bottle on the screen, which means you must remove the dirty water from the bottle. Your abrasion pen will stop working when this happens as it won’t have a container where to discard the water.

d) Unscrew and remove the waste liquid bottle from the machine

e) Empty the bottle by discarding the used water.

f) Place back the empty water liquid bottle and fasten it. The alert sign will disappear from the screen and you’ll be able to use the abrasion pen again.


 How to SET UP Part 1

Facial Liquid Solutions

How to set them up - step by step

 Premium Quality 

[How to SET UP 2] Tutorial

How to install the different handles machine

1- RADIOFREQUENCY

Plug the RF handle connector to the socket that says RF. Press it and screw it tight.

To continue reading please click here...

2- COLD HAMMER

Plug the COLD HAMMER connector to the socket that says COLD. Press it and screw it tight.


3- SPRAY GUN

Plug the SPRAY GUN connector to the outlet that says SPRAY. Once the connector has been fastened, fill the vial with the serum or solution of your choice and attach it to the sprayer making a little pressure.


4- CAVITATION // ULTRASOUND

Plug the CAVITATION connector into the socket that says ULTRASOUND. Press it and screw it tight.


5- SCRUBBER / SPATULA 

A- The Skin Scrubber is protected by a cover you must remove before using it

B- Plug the connector to the socket that says SCRUBBER. Press it and screw it tight.


6- ABRASION 

A- Before connecting the abrasion handle, we must assemble it. attach a filter to it as well as the tip we want to use. 

First, attach the round filter to the top of the abrasion pen and then, do the same with the tip you’d like to use. 

There are 6 different tips, which can all be used for all skin types. Choose the one that best adapts to your preferences.

B- Once the handle is assembled, Plug the abrasion connector into the socket that says ABRASION. Press it and screw it tight.


7 LED COLORS MASK

To connect it, insert the connector into the socket behind the led screen. Press it and screw it tight.

 How to SET UP Part 2

Bottles

 Loved by over 1000 customers worldwide

 Premium Quality 

[How to USE 3] Tutorial

In this tutorial we’ll explain how each tool works Hydra Oxygen Machine h2o2

The first four tools, skin scrubber, cavitation, radiofrequency and led mask, offer the same functions.

To continue reading please click here...

While the abrasion pen, cold hammer and spray gun are simpler and similar among each other.


Skin Scrubber

1 Set the intensity you’d like to work with. We recommend starting with low intensity. 

2 Select the working mode: continuous or intermittent 

3 Start the treatment (You can change the intensity or working mode if necessary ) 

4 Turn off the handle once the treatment is over.


Cavitation

This tool works similarly as you can set its intensity and working mode and change them during the treatment.

You can also turn it on and off using both, the handle or the screen. 

Turn off the handle once the treatment is over.

Remember to set the machine on 0 before turning it off.


-RF

The radiofrequency tool is used in the same way. Adjust its intensity and working mode from the handle or the screen and adapt the treatments to suit your needs.

Again, remember to set the handle on 0 before turning it off.


LED MASK

The intensity of the led mask can be set in the same way as the other tools, but its working mode is different.

There are two options: 

Flash mode- the light changes its color constantly

Color mode- the color changes manually every time you press the button. Red, green, blue, yellow, violet, cyan, white and start all over again. 

You can start this tool and turn it off using the screen


ABRASION

Use the abrasion pen with the following knobs: water - air - liquids

We recommend starting the treatment by setting the water flow and air suction at minimum or medium intensity and selecting the bottle you want to use. 

You can start and turn off the abrasion pen using the touch screen or by pressing the button in handle


COLD HAMMER

select this tool on the screen or just press the button in the handle. 

Wait for a couple of minutes until the tool is cold enough to start the treatment.

Make sure the vents are not obstructed

Turn it off when the treatment is over.


SPRAY GUN 

This tool can also be set from both, the screen or the handle. 

Use it with the vial pointing upwards.

Store it with the vial pointing downwards.


TIME

You can also set the time of the treatment with the correspondent buttons either before or during the treatment.


H2O2

Press the H2O2 button to sanitize the water of tube D with its blue light. You can use it and stop it whenever you want.

 How to Use - Part 3

Handles and Led Mask

 How to assemble them

 Easy to set and use

[Tips 4] Tutorial

In this video we’re going to tell you about the different accessories of our Hydra Oxygen Machine.

To continue reading please click here...

1) SPRAY GUN

The spray gun has a silicon edge to attach a vial.

A) VIAL

Bruun’s machine includes two vials. You can keep the spare one in a safe place and use it as a replacement, or change the vial depending on the product you want to use.

To install the vial, just fill it with a tonic or liquid solution and attach it to the spray handle. To remove it, just pull the vial downwards.

B) NEEDLE

The device includes a needle to open the spray gun in case it gets clogged. Poke the hole of the sprayer with the needle either to unclog it or just to clean it after each use.

2) ABRASION PEN

The abrasion pen works together with the liquid solutions found in the machine’s bottles. Before starting with the treatment, make sure each of the abrasion pen’s parts is well set. These parts include an O-ring, a filter and the tips

A- O-ring

The pen requires an O-ring, which prevents water from leaking during water suction. You may need to replace it eventually if it gets damaged. To do so, remove the old one and replace it with one of the spare O-rings.

B-Filters

After some uses you will need to replace the filter of your pen. To do so, remove the old one, place the spare round filter on the top of the pen and press it slightly with your fingers. The central part will come off and you would just need to place the tip of your choice on top.

C-TIPS

There are 6 types of tips available for your abrasion pen and they all adapt to every type of skin and liquids.

Choose the tip you want to use and after attaching the filter to the pen, put the tip on top and press it to fasten it.

Every tip has a different shape: plain, at an angle or spiraled, allowing estheticians to work comfortably and adapting to different skins.

You can even change the tipduring the treatment by pulling the tip upwards and replacing it with the new one.

1 ) SKIN SCRUBBER

A- Cover

Remove its cover before beginning the treatment

2) FUSE

If your machine does not turn on, you might need to replace its fuse. To do so follow these steps:

- Turn it off and unplug it.

- Using a screwdriver, remove the compartment that is located between the switch and the plug.

- There, you will find the damaged fuse. Remove it and replace it with the spare one by pressing it.

- Put the compartment back into the machine

- Plug the connector again and check the machine works.

Fuse: F25AL250V


 Tips - Part 4

Useful tips

*Make the most of your machine

 Premium Quality 

MORE INFO ABOUT YOUR MACHINE

PROBES

RF/ Radiofrequency

Face Lifting, Wrinkle Removal, Skin Tightening

Skin Scrubber 

Facial Skin Cleansing and nourishing

Cold Hammer

Shrinks Pores, soothing


Hydro Oxygen Spray

Deeply moisturizes the skin

Hydra Microdermabrasion

Cleansing, removes blackheads, exfoliates, hydrates


Ultrasonic 

increases product penetration, stimulates blood circulation, promotes metabolism


LIQUIDS

AS1 HYDRA PEEL SOLUTION

Give your skin a vibrant youthful appearance. Cleansing, exfoliating, moisturizing. Suitable for all skin types.

Ingredients: Lactic acid, yeast extract, green tea extract, algae extract



SA2 CLEANSING SOLUTION

Soothing, strong cleansing power, moisturizing. Improves acne and rashes. Suitable for oily and sensitive skin. Ingredients: Salicylic acid, lactic acid, sodium lactate, allantoin, honey extract, aloe extract


AO3

Suitable for all skin types, Highly nourishing and hydrating. It repairs and regenerates the skin and inhibits melanin making your skin look smoother and bright.

Ingredients: Aloe Vera, vitamin C, vitamin E, green tea extract


QUICK STEPs

TO BEAUTIFUL SKIN!

PROTOCOL

There are different procedures to using this machine. You can do just one treatment or you can combine different treatments in one session. Here goes just one possible step by step to treat your skin.


Remove makeup (you can use Bruun’s oils)

Apply facial cleanser and remove it with water. (You can use the abrasion option selecting tube D, pressing the H2O2 bottom, low air suction and high water flow for better results.)

Apply the solution into the Hydro Oxygen Spray container and select the program and working time on the display. Spray it 2mm away from the skin for over 2-3 minutes.

Select Abrasion program and tube A. Choose the desired air suction and liquid flow intensity. Slide the tip of the tool all over the face linearly for about 5-10 minutes to prepare and hydrate the skin. 

Replace the Hydra Microdermabrasion tip for a more intense one. Keeping the Abrasion program, select tube B. Choose the desired air suction and liquid flow intensity. Slide the tip of the handle all over the face linearly for about 15-20 minutes, focusing on the T zone (forehead, nose, chin) and/or on blackhead areas or thickened skin. 

Replace the Hydra Microdermabrasion tip for a softer one. Keeping the Abrasion program selected, choose tube C, and the desired air suction and liquid flow intensity.Perform the treatment all over the face for about 5 minutes or until it is fully covered by the liquid. 

Select the Skin Scrubber program and its working and mode intensity. Slide all over the face to deeply clean and nourish it for about 10-15 minutes. Or, As an optional step, you can apply a Bruun Jelly Mask that suits your skin needs, and let it on for about 10-15 minutes.

Before performing the RF/radiofrequency treatment, apply enough Bruun Advanced Serum or neutral skin gel all over the face. Select the working mode, time and intensity. Slide the RF tool all over the face (2-3 times on each area.)

Before using the Ultrasonic handle, apply Bruun Advanced Serum or neutral gel all over the face once again. Select the working mode, time and intensity. Slide the Ultrasonic tool all over the face (2-3 times on each area.)

Use the Hydro Oxygen Spray 2 mm away from the face for about 2 minutes to hydrate the skin.

Select the Cold Hammer program and slide the tool all over the face for about - minutes to decongest. It reaches its highest temperature after 2 minutes.

Select the Abrasion treatment and choose tubes C or D (pressing the H2O2 button). Select low air suction and high air flow intensity to remove residues and clean the face.

Select the working mode and time of the Led Mask and apply over the face once it is clean and dry.

As an optional step, you can perform a massage using your Cryo Ice Globes, Gua-Sha or Jade Roller + Essential oils by Bruun Beauty. This will help you relax and nourish the skin.

Apply Advanced Serum and sunscreen to finish off the treatment. 

WARNING


  • Fill the H2O2 BOTTLE Only with distilled water

  • In case of irritation, suspend the treatment

  • Do not apply on damaged skin

  • Avoid its use if you are under a treatment that includes retinoids

  • Avoid using it more often than it is suggested (See information above.)

ONE MACHINE, MULTIPLE BENEFITS, 

HUNDREDS OF HAPPY FACES.

TECHNOLOGY

This hydra derma abrasion machine turns purified water into hydrogen oxygen water, which generates small H2 molecules on the surface of the skin, so that they can quickly penetrate the skin to achieve better results. Painless and suitable for all skin types.

7 DEVICES

It is equipped with 7 devices to treat different skin-related issues:

beauty product sprayer, cold hammer, skin scrubber, RF (Radio frequency) handle and microdermabrasion handle, and LED mask (7 colors). Set the machine using the touch screen to

suit your needs.

PERSONAL AND PROFESSIONAL USE

This new facial machine is the equipment every professional esthetician needs in their beauty spas. Enjoy all the benefits of our 7 in 1 machine at beauty spas, salons, suites or at home.

Specification

  • Instrument Name: Hydrogen Oxygen Facial Machine

  • Functionality: Seven in one

  • Material: ABS

  • Color: As Pictures Show

  • Voltage: 100V-120V / 220V-240V

  • Measurements: 17.9" * 16.7" * 11.8"

  • Net Weight: 26.5 Lbs  /  12 KG

Sale Off
BRÜUN Oxygen Machine 7 in 1 Hydra Dermabrasion Face Care Hydrogen-Oxygen Device Small Bubbles Aqua Peeling for Skin Moisturizing for Spa and Beauty Salon SH-Hydrogen Oxygen Facial Machine Bruun Beauty

Package Included

  • 1 x Main Machine & 1 x Power Cord

  • 1 x Skin Scrubber Handle

  • 1 x RF Lifting Head

  • 1 x Cold Hammer Handle

  • 1 x Hydra Dermabrasion Pen

  • 6 x Hydra Dermabrasion Tips

  • 1 x Polymer Atomizing Pen

  • 1 x Ultrasonic Handle

  • 1x Led phton mask 7 colors

  • 3x Solution Liquid

  • 1x User Manual

This painless hydra derma abrasion machine turns purified water into hydrogen oxygen water, which generates small H2 molecules on the surface of the skin, so that they can quickly penetrate the skin to achieve better results. 

BENEFITS AND FUNCTIONS

BENEFITS AND FUNCTIONS

Improves blood circulation

Promotes collagen production 

Removes dead skin blackheads and wrinkles

Shrinks pores

Fades dark circles around eyes

Eliminates redness and eye bags. 

Firming, lifting and skin tightening.

Whitening

EVERYTHING YOU NEED TO KNOW BEFORE YOU START

This 7 in 1 machine is very easy to use.

First, identify its parts: handles, hoses, liquid containers. 

Follow the instructions in the user guide to install the equipment. 

Once the equipment is ready, fill the liquid containers (A,B and C) that are located on the front with the correct bottle.


Container A

AS1 CLEANSE EXFOLIATE HYDRATE (Blue)-

 PRIMER

Container B

OIL CONTROL EXFOLIATE HYDRATE (Orange) - CLEANSING

Container C

AO3 VITAMIN - C SERUM HYDRATE (Pink) - NOURISHING

Free shipping

For orders over $ 100

Free return

Free return within 5 days

Money-Back Guarantee

100% Money-Back guarantee

Make sure you hear a ‘click’ once you place the tubes back in the machine. 

Two more tubes are located at the back of the machine: H202 and Waste Bottle

H2O2 Tube: Distilled Water or Purified Water – CLEAN, RINSE, DISINFECT

Waste bottle: Empty

Make sure you screw the tubes tight when placing them back in the machine. 

Once the liquid containers are filled up and the handles are set, plug in the machine and turn it on

Select the desired language.


How often can I use each treatment?

RF / Radiofrequency treatment – once a week or once every 15 days.

Scrubber treatment – once a week or once every 15 days.

Cold treatment - two or three times a week

Spray treatment – two or three times a week

Ultrasound treatment – every 15/21 days

LED Mask treatment - 2 or 3 times a week

Abrasion treatment:

A- Hydra Solution – 2 or 3 times a week

B- Hydra Microdermabrasion – every 15/21 days

86 five-star reviews 

Customers Also Bought